The lights are night vision lighting friendly and therefore suitable for use with aircraft flying on night vision goggles. All lights are sealed to IP67 and meet stringent EMC requirements; the DC variants are fully tested to Def Stan 59-411.
- The Masthead Light not only meets the requirements of the
COLREGS for vessels of over 50m as a stand alone part, but the LED
light source also provides the advantage of low power consumption.
- The critical COLREG angular cut-off requirements are met entirely
within the housing of the sidelights, removing the need for
fitted sidescreens. All other requirements of the COLREGs for vessels
over 50m are met with the added advantages provided by LED light
sources. LEDs are carefully binned to guarantee lifetime compliance
to the regulations.
- As well as meeting all the COLREG requirements for any vessel over 50m in
length the Stern Light provides a particular advantage to any vessel
handling the approach of an NVG aided aircraft due to the LED light source
and dimming capability. A non-standard red variant is also available.
- The position of the LEDs in the anchor light have been calculated
to provide an even light output over the full required 360°. They are
carefully binned to confirm full compliance to the COLREGs over the
lifetime of the product.
- These lights have been designed to meet all the signalling requirements
detailed in the COLREGs for vessels over 50m in length. The NUC/RAM/CBD Lights are designed to be used in tandem with one light mounted in front of the mast and a second mounted to the rear with the required 360° distribution split between the two. The lights are available in red only or red/white with the red modes able to flash in order to cover all possible signalling variations required by the COLREGs.
- The position of the LEDs in the anchor light have been calculated
to provide an even light output over the full required 360°. They are
carefully binned to confirm full compliance to the COLREGs over the
lifetime of the product.